www.sunled.com part number: DUR11A-A 10.92mm (0.43") single digit numeric dis- play mar 24,2011 sdsa2052 v5 layout: maggie l. p. 1/3 absolute maximum ratings (t a =25c) ur (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 ma power dissipation p d 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3-5 seconds package schematics notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subjec t to change without notice. ur (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.9 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 627 nm wavelength of dominant emission (typ.) (i f =10ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =10ma) 45 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c) part number emitting color emitting material wavelength nm p description min. typ. DUR11A-A red gaasp/gap 3600 6890 627 common anode, rt.<. hand decimal. luminous intensity (i f =10ma) ucd features low power consumption robust package i.c. compatible standard configuration: gray face w/ white segments optional black face provides superior color contrast rohs compliant
www.sunled.com part number: DUR11A-A 10.92mm (0.43") single digit numeric dis- play mar 24,2011 sdsa2052 v5 layout: maggie l. p. 2/3 ? ur remarks: if special sorting is required (e.g . binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com part number: DUR11A-A 10.92mm (0.43") single digit numeric dis- play mar 24,2011 sdsa2052 v5 layout: maggie l. p. 3/3 packing & label specifications
|
